...
Home
About E3 Displays ▾
All Products ▾
Solutions ▾
Industries We Serve ▾
Resources ▾
Contact Us ▾
🎯 Build Your Display Contact Us

8 Site Conditions to Check Before Choosing an Outdoor Readable Display

8 Site Conditions to Check Before Choosing an Outdoor Readable Display

Two kiosks can have the same panel, housing, and brightness rating, but one will be readable all day while the other will wash out in the afternoon and get hot all summer. It depends on the site. An outdoor readable display’s performance depends on site conditions like screen direction, shade, viewing distance, viewing angle, temperature range, dust and moisture, glove or wet-hand use, and service access.

Before choosing a panel, consider these 8 factors that affect your panel’s specifications, brightness, touch functionality, housing, and servicing.

People Also Ask

What is an outdoor readable display?

An outdoor readable display is a screen that can be clearly read in daylight. This is achieved with high brightness, a low-glare surface, and a housing designed to withstand high temperatures, dust, and humidity. Many also have glove-friendly, waterproof touchscreens.

How bright should an outdoor screen be?

This depends on the display’s location. If it will be in a shaded area, it will not need to be as bright as one in direct sunlight during the middle of the day. Screen glare will also affect how bright it needs to be. If it has a low-glare front surface, it can be set to a lower brightness.

Why do outdoor readable displays fail in the field?

Most outdoor readable displays that fail haven’t been fully specified for the location they will be installed in. Common causes of failure include direct sunlight on the glass, high temperatures, and humidity ingress. Touch screens that don’t work with gloves or in the rain are another common issue.

1. Which Direction the Screen Faces

The sun’s position affects how much light reaches your screen. In the Northern Hemisphere, screens facing south will receive direct sunlight for most of the day. Those facing north will receive very little. Screens facing east or west will receive indirect light in the morning or evening. The requirements should state when the screen will be at its worst and what brightness and reflection levels are required. A south-facing screen gains from displays that use ambient light to their advantage rather than fighting it with brightness alone.

2. Whether Anything Shades the Screen

Obstructions such as buildings, canopies, and trees can block some of the sun. This can change depending on the time of year.

A tree may cover a screen in summer but leave it bare in winter. Partial obstructions can also make one side of the screen hotter than the other. A site visit should be carried out at various times throughout the day.

3. How Far Away the Viewer Stands

The viewer’s distance will affect the size of the screen and text. If the screen will be viewed from a car or across a platform, the text needs to be larger and high-contrast. If it will be viewed from close range (arm’s length), then the text can be smaller. However, the screen must be touch-friendly. Often, getting the distance right solves issues that increasing brightness won’t.

4. The Viewing Angle People Actually Use

Few people view outdoor screens head-on. Drivers look across, standing users look down and seated users look up. Contrast drops as the angle widens, so the requirement should state contrast at the real viewing angles. Wide viewing cone displays hold contrast across a broader range.

Polarized sunglasses are worth testing too, because they can black out some LCDs at certain angles. Polarizer orientation is one of several items best settled early, listed in our pre-specification checklist for OEM teams.

5. The Temperature Range at the Site

Outdoor displays have extreme conditions. Sunlight and backlighting can cause the panel to overheat in the summer.

In winter, liquid crystals slow down, making the display sluggish. Some assemblies can have condensation due to large temperature changes. Wide temperature displays and a planned thermal path cover both ends of the range.

6. Exposure to Dust, Salt and Moisture

Every site brings its own contaminants. Coastal sites add salt spray that attacks metal and seals. Farms add fine dust. Industrial plants add oil mist and cleaning chemicals. The enclosure must keep it all out, and the front seal is often the weak point. Optical bonding helps by filling the gap behind the cover glass where moisture and dust collect.

7. Whether People Wear Gloves or Arrive Wet

A touch screen that works with bare fingers may ignore a gloved hand. Rain can also trigger false touches on a standard sensor. PCAP touchscreens can be tuned to accept gloves and reject water droplets.

The cover lens matters as well. Thicker glass offers better protection but moves the finger farther from the sensor. Each layer above the LCD also costs contrast, as our article on the optical cost of a touch stack explains.

8. Access for Service

All displays will require some service. Pole-mounted displays may require a lift truck and road closure. Dashboard displays may require removal of the entire dashboard.

Hard-to-reach displays will require longer-lasting components, sealed designs, and less field adjustment. Component lifecycle planning matters most here, which is where inspection and obsolescence management earn their place. Easier-to-reach displays can sacrifice some of these features for a lower initial cost.

Let the Site Write the Specification

The site specifies an outdoor readable screen as much as the application does. Two identical units can perform very differently once real sun, shade, weather, and users are involved. Walking the site before writing the requirement catches most of these issues early. The guide to specifying a sunlight-readable display shows how each condition becomes a specification item.

E3 Displays starts from off-the-shelf panels and adds the brightness, bonding, and touch integration each site calls for. To review site conditions for an outdoor readable monitor, talk to an E3 Displays engineer.

FAQ

Frequently Asked Questions

Does an outdoor screen always need maximum brightness?

No, dark areas will require a much lower brightness. Getting the right brightness for your site will reduce heat, electricity, and reduce backlight life.

When should a site be checked before specifying?

The worst times are early morning and late afternoon. Checking during different seasons can help, as trees can cause shading and low winter sun.

Can a hood replace a brighter panel?

Yes and no. A hood will prevent direct sunlight from hitting the display, reducing heat and glare. It also reduces the side viewing angle, so it is ideal for mainly frontal viewing.

What should a coastal enclosure include?

Corrosion-resistant materials and a well-sealed front face. The IP rating should cover the front face and the full enclosure separately.

Do polarized sunglasses affect all outdoor screens?

They affect most LCDs. Depending on polarizer orientation, the screen may dim or go black at certain angles. A 45-degree polarizer or retarder film prevents full blackout.

Author

Adam Hofmann

Adam Hofmann

Adam Hofmann is the Vice President of Engineering at E3 Displays, with extensive experience in display and enclosure solutions for commercial and industrial applications. With a strong understanding of technical… Read More

    Which of the following best describes you?

    Please describe your current project situation

    What is most important for you?

    Select all that apply

    You're all set!

    Tell us about yourself and we'll reach out with tailored solution options.