...
Home
About E3 Displays ▾
All Products ▾
Solutions ▾
Industries We Serve ▾
Resources ▾
Contact Us ▾
🎯 Build Your Display Contact Us

How High Brightness and Transflective Displays Compare Outdoors

How High Brightness and Transflective Displays Compare Outdoors

Two known methods ensure a display can be viewed easily outdoors. The first method is to increase backlight intensity to overcome bright sunlight. The second method uses sunlight by reflecting it. Whilst most engineers will know the first method, few will know the second. Each suits a different kind of daylight-readable display.

The following blog compares the two methods. Describing how they work and the areas where there would be the most cost. It also includes power consumption, heating, image quality, and availability. At the end, an easy decision tree matches the method to the application.

People Also Ask

What is a daylight readable display?

A daylight readable display has been designed to be seen clearly in bright daylight conditions. This can be achieved with either a high-brightness backlight or transflective layers that reflect sunlight. Low-reflectivity materials and optical bonding can also help.

Is a transflective display better than a high-brightness display?

There is no one-size-fits-all answer. Transflective displays consume less power and become easier to read as they get brighter. High-brightness displays have richer colors and perform better in low-light conditions and at night.

Do daylight readable displays use more power?

High-brightness displays consume more power because the backlight works harder. Transflective displays can actually consume less than a typical indoor screen as the daylight helps.

Two Ways to Build a Daylight Readable Display

High-brightness screens can overpower bright ambient light with a very bright backlight.

Transflective screens make use of ambient light. A semi-reflective layer behind the pixels reflects sunlight through the screen. The backlight still passes through the screen for use in low light. Which route suits a product usually comes down to the questions settled before panel selection: power source, duty cycle and the light the screen will actually see.

How High Brightness Backlights Work

A high-brightness daylight-readable LCD keeps the standard panel design and upgrades the light behind it. More LEDs run at higher drive currents, using more front-emitting films to produce a bright, vivid image resembling an indoor screen.

This is suitable for mains-powered applications with long operating times, such as signage, kiosks, vehicle displays, and marine bridge screens.

How Transflective Panels Work

Transflective panels add an extra layer of material behind the pixels. They reflect some light. Our article on how a hybrid polarizer switches modes explains the mechanism in detail. This means that in bright sunshine, the panel reflects light to illuminate the image. The brighter it is outside, the more light is reflected, making images easier to read in harsh conditions. In the shade or at night, the image can still be viewed using the backlight.

E3 Displays offers transflective and reflective polarizer options through its all light readability displays.

Power, Heat and Image Quality Compared

Factor High brightness Transflective
Power draw High, and highest in full sun Low, and the backlight can dim or switch off in daylight
Heat behind the panel Significant, so it needs a thermal path Minimal from the backlight
Enclosure impact May need heat spreaders, venting or fans Easier to seal
Color in sunlight Rich and saturated More muted
Readability as sun increases Falls, unless brightness rises with it Improves
Low light and night Strong Weaker, because less backlight passes through

If you have limited power available, then transflective displays are often used on the battery-operated handheld devices and solar-powered field devices. Display type also affects thermal issues. High-brightness displays produce more heat, which must be removed from the housing. Transflective displays don’t add much heat.

Cost, Availability and Size Options

High-brightness displays are available in a large range of sizes and resolutions. Many standard displays can be upgraded with a higher-brightness backlight. Transflective color displays are not as common. Options become more limited for larger displays. Monochrome and smaller transflective displays are easier to source. Where monochrome is acceptable, our comparison of memory LCD against transflective TFT shows how much further the power saving goes. For both approaches, optical bonding and anti-reflective film improve readability without adding power.

Which Approach Fits Which Application

Three questions settle most decisions:

  • Power source: battery or solar power points toward transflective. Mains power keeps both options open.
  • Duty cycle: long hours at high brightness favor transflective for heat and power. Short or occasional use makes high brightness easier to manage.
  • Lighting range: screens used mostly in full sun suit transflective. Screens used across shade, indoors, and night often suit high brightness, or a transflective panel with a stronger backlight.

Power Budget and Lighting Range Decide It

Neither approach wins in the abstract. A daylight readable screen for a solar-powered field unit has different needs from one in a vehicle dash. The power budget and the lighting range point to the right choice. The guide to specifying a sunlight-readable display covers how this choice fits with heat, touch, and enclosure decisions.

E3 Displays starts from off-the-shelf panels and adds the backlight, bonding, and films each application needs. To compare both approaches for a specific daylight viewable display, talk to an E3 Displays engineer.

FAQ

Frequently Asked Questions

Can a transflective display work at night?

Yes. Its backlight shines through the transflective layer. It looks dimmer than a high-brightness panel with the same backlight.

Why does transflective color look more muted?

Reflected sunlight passes through the color filters twice, which reduces saturation. Indoor-style color is easier to achieve with a strong backlight.

Can a high-brightness and transflective design be combined?

Yes. A transflective panel can use a stronger backlight to improve shade and night performance. This adds some power and heat.

Which approach suits handheld devices?

Battery-powered handhelds often use transflective panels. They stay readable outdoors and extend battery life because the backlight can run low.

Does optical bonding help both approaches?

Yes. Bonding removes internal reflections in either design. That raises contrast in sunlight without increasing backlight power.

Author

Adam Hofmann

Adam Hofmann

Adam Hofmann is the Vice President of Engineering at E3 Displays, with extensive experience in display and enclosure solutions for commercial and industrial applications. With a strong understanding of technical… Read More

    Which of the following best describes you?

    Please describe your current project situation

    What is most important for you?

    Select all that apply

    You're all set!

    Tell us about yourself and we'll reach out with tailored solution options.